BDC Corporation Products Catalogue

This product is designed for leveling on to the sub-floor such as concrete, screed and etc before the installation of PVC and other floor covering. It can be applied in thickness from 0.5-10.0 mm in one application. Final results comply to German standard (DIN)

Properties:

Excellent flow ability
quick drying in any thickness
Compressive strength 32 N/mm2 or approx: 4600 psi
Low in tension
Resistant to furniture castors

Technical Data

Color	Grey
Supplied in	Powder
pH-value	12.5
Power density	1.3 Kg/litre
Mixing Ratio	6.0 litres of water: 25 kgs of powder
Consumption	1.5 kg/ 1 sqm/ 1 mm thickness
Open time	30 minutes at 30 degree C.
Initial setting	45-60 minutes
Final Setting	after 24 hours
Ready to install floor covering	after 24 hours
Resistant to furniture castors	Yes (at least 1 mm thickness DIN 68131)
Packing	25 kg / paper bag; 42 x 25 Kg / pallet

Sub-floor Preparation:

The sub floor should be according to national standards, permanently dry, free of cracks and structurally sound. If necessary completely remove old adhesive residue and repair any cracks. Before application, if the sub floor is new it should have aged at least 28 days.

Direction:

Before leveling, apply a suitable primer in order to bind the dust and close pores. Mix leveling with clean water at ratio of 5:1 or 25 kg of powder to 6.0 litres of water. Using an electric drill with a speed of 400-600 rpm until it is lump free.